| 890-692 |
WAGO Corporation |
Lockout cap 2-pole, white |
| 770-643 |
WAGO Corporation |
Lockout cap 3-pole, black |
| 890-643 |
WAGO Corporation |
Lockout cap 3-pole, black |
| 770-693 |
WAGO Corporation |
Lockout cap 3-pole, white |
| 890-693 |
WAGO Corporation |
Lockout cap 3-pole, white |
| 770-644 |
WAGO Corporation |
Lockout cap 4-pole, black |
| 890-644 |
WAGO Corporation |
Lockout cap 4-pole, black |
| 770-694 |
WAGO Corporation |
Lockout cap 4-pole, white |
| 770-645 |
WAGO Corporation |
Lockout cap 5-pole, black |
| 770-695 |
WAGO Corporation |
Lockout cap 5-pole, white |
| 770-360 |
WAGO Corporation |
Lockout cap for plugs 5-pole, yellow |
| 770-221 |
WAGO Corporation |
Lockout cap for socket 12-pole, white |
| 2002-194 |
WAGO Corporation |
Lockout cap; for wire insertion and actuating opening; blue |
| 2002-191 |
WAGO Corporation |
Lockout cap; for wire insertion and actuating opening; gray |
| 2006-191 |
WAGO Corporation |
Lockout cap; for wire insertion and actuating opening; gray |
| 2002-192 |
WAGO Corporation |
Lockout cap; for wire insertion and actuating opening; orange |
| 231-668 |
WAGO Corporation |
Lockout caps; for covering unused clamping units; gray |
| 231-669 |
WAGO Corporation |
Lockout caps; for covering unused clamping units; orange |
| 831-321 |
WAGO Corporation |
Lockout pin; 2 parts; light gray |
| 09670029010 |
Harting |
Long Knurled Locking Screw for D-Sub IP67 hood, 4-40UNC |
| 09670029011 |
Harting |
Long Knurled Locking Screw for D-Sub IP67 hood, M3 |
| 753-648 |
WAGO Corporation |
LON®-FTT Interface; - |
| 857-450 |
WAGO Corporation |
Loop-powered isolation amplifier; Bipolar current and voltage input signal; Current output signal; Configuration via DIP switch; Power via input; 6 mm module width; 2,50 mm² |
| 8002-100/000-277 |
WAGO Corporation |
Low Input Current, isolated voltage level optocoupler |
| 873-903 |
WAGO Corporation |
Luminaire disconnect connector yellow, 100 pc jar |
| 873-902 |
WAGO Corporation |
Luminaire disconnect connector yellow, 200 pc jar |
| 873-953 |
WAGO Corporation |
Luminaire disconnect connector yellow, 500 pc bag |
| 20210011012 |
Harting |
LWL KABEL SERCOS 3,6 MM PUR |
| 20210011011 |
Harting |
LWL-KABEL SERCOS 6,0 MM PUR |
| 09641007243 |
Harting |
M/F DSUB FILTER ADAPTER 9PIN 3900PF |
| 2134D200838010 |
Harting |
M12 A 8pol an/- m/- PUR shld 1m |
| 21345859564045 |
Harting |
M12 A-cod 5-pol st/st m/f PVC DN st 4.5m |
| 21348700870100 |
Harting |
M12 A-cod 8-pol an/- f/- PUR 10M |
| 21033214201 |
Harting |
M12 A-code 12pin female angled pcb mount, shielded, front mounting |
| 21033532C00 |
Harting |
M12 A-code 12pin female panel feed through to 0.5m AWG26 flying leads, front mount, PVC |
| 21033176305 |
Harting |
M12 A-code 3pin female panel feed through to 0.5m AWG24 flying leads, front mount, PVC (pins 1,3,4) |
| 21032122306 |
Harting |
M12 A-code 3pin female, HARAX/IDC, unshielded, 0.34-0.75mm2 (AWG22-18), for cable 6-8mm (pins 1,3,4) |
| 21032122400 |
Harting |
M12 A-code 3pin female, HARAX/IDC, unshielded, 0.34-0.75mm2 (AWG22-18), for cable 6-8mm (pins 3,4,5) |
| 21031112305 |
Harting |
M12 A-code 3pin female, HARAX/IDC, unshielded, AWG26-22, for cable 2.9-5.1mm (pins 1,3,4) |
| 21032121306 |
Harting |
M12 A-code 3pin male, HARAX/IDC, unshielded, 0.34-0.75mm2 (AWG22-18), for cable 6-8mm (pins 1,3,4) |
| 21032121400 |
Harting |
M12 A-code 3pin male, HARAX/IDC, unshielded, 0.34-0.75mm2 (AWG22-18), for cable 6-8mm (pins 3,4,5) |
| 21031111305 |
Harting |
M12 A-code 3pin male, HARAX/IDC, unshielded, AWG26-22, for cable 2.9-5.1mm (pins 1,3,4) |
| 21038224505 |
Harting |
M12 A-code 4/5pin female shielded angled, crimp, for cable 4.5-8.8mm |
| 21038214507 |
Harting |
M12 A-code 4/5pin female shielded, crimp, slim design, angled, cable entry requires crimp flange set |
| 21038214511 |
Harting |
M12 A-code 4/5pin female shielded, crimp, slim design, angled, for cable 5.3mm by using flange and ferrule |
| 21038214512 |
Harting |
M12 A-code 4/5pin female shielded, crimp, slim design, angled, for cable 6.0mm by using flange and ferrule |
| 21038214505 |
Harting |
M12 A-code 4/5pin female shielded, crimp, slim design, angled, for cable diameter 5.7-8.8mm |
| 21038212507 |
Harting |
M12 A-code 4/5pin female shielded, crimp, slim design, straight, cable entry requires crimp flange set |
| 21038212511 |
Harting |
M12 A-code 4/5pin female shielded, crimp, slim design, straight, for cable 5.3mm by using flange and ferrule |
| 21038212512 |
Harting |
M12 A-code 4/5pin female shielded, crimp, slim design, straight, for cable 6.0mm by using flange and ferrule |
| 21038212506 |
Harting |
M12 A-code 4/5pin female shielded, crimp, slim design, straight, for cable diameter 4.5-8.8mm |
| 21038212505 |
Harting |
M12 A-code 4/5pin female shielded, crimp, slim design, straight, for cable diameter 5.7-8.8mm |
| 21038212527 |
Harting |
M12 A-code 4/5pin female shielded, panel feed through, crimp, slim design, cable entry requires crimp flange set |
| 21038212526 |
Harting |
M12 A-code 4/5pin female shielded, panel feed through, crimp, slim design, for cable diameter 4.5-8.8mm |
| 21038212525 |
Harting |
M12 A-code 4/5pin female shielded, panel feed through, crimp, slim design, for cable diameter 5.7-8.8mm |
| 21038223505 |
Harting |
M12 A-code 4/5pin male shielded angled, crimp, for cable 4.5-8.8mm |
| 21038213507 |
Harting |
M12 A-code 4/5pin male shielded, crimp, slim design, angled, cable entry requires crimp flange set |
| 21038213511 |
Harting |
M12 A-code 4/5pin male shielded, crimp, slim design, angled, for cable 5.3mm by using flange and ferrule |
| 21038213512 |
Harting |
M12 A-code 4/5pin male shielded, crimp, slim design, angled, for cable 6.0mm by using flange and ferrule |
| 21038213505 |
Harting |
M12 A-code 4/5pin male shielded, crimp, slim design, angled, for cable diameter 5.7-8.8mm |
| 21038211507 |
Harting |
M12 A-code 4/5pin male shielded, crimp, slim design, straight, cable entry requires crimp flange set |
| 21038211511 |
Harting |
M12 A-code 4/5pin male shielded, crimp, slim design, straight, for cable 5.3mm by using flange and ferrule |
| 21038211512 |
Harting |
M12 A-code 4/5pin male shielded, crimp, slim design, straight, for cable 6.0mm by using flange and ferrule |
| 21038211506 |
Harting |
M12 A-code 4/5pin male shielded, crimp, slim design, straight, for cable diameter 4.5-8.8mm |
| 21038211505 |
Harting |
M12 A-code 4/5pin male shielded, crimp, slim design, straight, for cable diameter 5.7-8.8mm |
| 21038211526 |
Harting |
M12 A-code 4/5pin male shielded, panel feed through, crimp, slim design, for cable diameter 4.5-8.8mm |
| 21038211525 |
Harting |
M12 A-code 4/5pin male shielded, panel feed through, crimp, slim design, for cable diameter 5.7-8.8mm |
| 21011405091 |
Harting |
M12 A-code 4pin angled female HARAX/IDC, unshielded, AWG24/7-20, cable 4-5.1mm |
| 21011405081 |
Harting |
M12 A-code 4pin angled male HARAX/IDC, unshielded, AWG24/7-20, cable 4-5.1mm |
| 21033214401 |
Harting |
M12 A-code 4pin female angled pcb mount, shielded |
| 21033194401 |
Harting |
M12 A-code 4pin female angled, screw termination, unshielded, max. AWG16, for cable 4-8mm |
| 21033112400 |
Harting |
M12 A-code 4pin female panel feed through to 0.5m AWG20 flying leads, front mount |
| 21033176405 |
Harting |
M12 A-code 4pin female panel feed through to 0.5m AWG24 flying leads, front mount, PVC |
| 21033176410 |
Harting |
M12 A-code 4pin female panel feed through to 1.0m AWG24 flying leads, front mount, PVC |
| 21033222400 |
Harting |
M12 A-code 4pin female shielded, slim design, HARAX/IDC, AWG 22, for cable 5.7-8.8mm |
| 21033222410 |
Harting |
M12 A-code 4pin female shielded, slim design, HARAX/IDC, AWG 26, for cable 5.7-8.8mm |
| 21033216410 |
Harting |
M12 A-code 4pin female straight panel feed through pcb mount, IP20 |
| 21033216420 |
Harting |
M12 A-code 4pin female straight panel feed through pcb mount, IP67 |
| 21033212418 |
Harting |
M12 A-code 4pin female straight pcb mount (w/o housing), shielded version |
| 21033212431 |
Harting |
M12 A-code 4pin female straight pcb mount, shielded version + front mount housing |
| 21033212430 |
Harting |
M12 A-code 4pin female straight pcb mount, shielded version + rear mount housing |
| 21033292401 |
Harting |
M12 A-code 4pin female straight, screw termination, shielded, max. AWG16, for cable 4-8mm |
| 21033192401 |
Harting |
M12 A-code 4pin female straight, screw termination, unshielded, max. AWG16, for cable 4-8mm |
| 21033112410 |
Harting |
M12 A-code 4pin female straight, SMT pcb mount, unshielded |
| 21033112411 |
Harting |
M12 A-code 4pin female straight, SMT pcb mount, unshielded, reel of 75pieces |
| 21032212405 |
Harting |
M12 A-code 4pin female, HARAX/IDC, shielded, AWG26-22, for cable 4.5-8.8mm |
| 21033212425 |
Harting |
M12 A-code 4pin female, HARAX/IDC, shielded, panel feed through, AWG26-22, for cable 4.5-8.8mm |
| 21032122305 |
Harting |
M12 A-code 4pin female, HARAX/IDC, unshielded, 0.34-0.75mm2 (AWG22-18), for cable 6-8mm |
| 21032122407 |
Harting |
M12 A-code 4pin female, HARAX/IDC, unshielded, 0.34-0.75mm2 (AWG22-18), for cable 7-8.8mm |
| 21031122405 |
Harting |
M12 A-code 4pin female, HARAX/IDC, unshielded, AWG24/7-20, for cable 2.9-5.1mm |
| 21031112405 |
Harting |
M12 A-code 4pin female, HARAX/IDC, unshielded, AWG26-22, for cable 2.9-5.1mm |
| 21033213401 |
Harting |
M12 A-code 4pin male angled pcb mount, shielded |
| 21033193401 |
Harting |
M12 A-code 4pin male angled, screw termination, unshielded, max. AWG16, for cable 4-8mm |
| 21033111402 |
Harting |
M12 A-code 4pin male panel feed through to 0.5m AWG20 flying leads, front mount |
| 21033111410 |
Harting |
M12 A-code 4pin male panel feed through to 1.0m AWG20 flying leads, front mount |
| 21033221400 |
Harting |
M12 A-code 4pin male shielded, slim design, HARAX/IDC, AWG 22, for cable 5.7-8.8mm |
| 21033221410 |
Harting |
M12 A-code 4pin male shielded, slim design, HARAX/IDC, AWG 26, for cable 5.7-8.8mm |
| 21033211410 |
Harting |
M12 A-code 4pin male straight panel feed through pcb mount, IP20 |
| 21033211420 |
Harting |
M12 A-code 4pin male straight panel feed through pcb mount, IP67 |
| 21033211418 |
Harting |
M12 A-code 4pin male straight pcb mount (w/o housing), shielded version |
